Map your floor and light your shelves
Record where every printer stands, then let WLED shelf lights show each printer’s state from across the room.
-
Draw the plan
Floor plan: rooms, sections, shelves and places, plus doors, desks and other assets. Drag printers onto their places.
-
See it everywhere
The location shows in each printer’s window and in the Dashboard’s floor-plan view, so anyone can walk straight to a printer.
-
Add shelf lights (optional)
Lighting drives WLED LED strips under each shelf: one color per printer state, so a run-out or a finished plate is visible from the door.
- Works with off-the-shelf WLED controllers on your Wi-Fi
- Racks and shelves come from the floor plan
- Locate flashes one printer’s light
Every screen in this guide has a full article in the Help centre inside Popp Farm.
More guides
Getting started with Popp Farm
Create your workspace, connect your Bambu Lab account, invite your team and send your first plate.
Read →Keep every printer busy with the Smart Queue
Add jobs once, let the queue match them to printers with the right colors, and send the next plate the moment one comes off.
Read →Multi-color printing across a mixed fleet
Color single parts in Studio, map every color to an AMS slot, and slice the same project for any Bambu Lab model.
Read →Put your whole farm on one screen
Start free with up to 3 printers, or try any paid plan free for 14 days. Connect your Bambu Lab account and your printers appear in minutes.
No install · No LAN setup · Nothing prints until a person says the plate is clear